Shop Smart and Stay Safe
| Our COVID-19 Update Learn More >
Pool Supply World remains committed to helping you keep your pool clean, clear & safe. Due to overwhelming demand, order processing may take up to an additional 72 hours.
U.S. Motors - ASB796 C-Flange 1.5HP Full Rated 56J 115/230V Pool & Spa Pump Motor
U.S. Motors - ASB796 C-Flange 1.5HP Full Rated 56J 115/230V Pool & Spa Pump Motor
Availability:
-
In Stock
$209.99
Description
The U.S. Motors Emerson ASB796 C-Face 1.5HP Full Rated 56J 115V/230V Single Speed Pool and Spa Pump Motor is a powerfully designed replacement motor.
- Shaft Threads - 7/16-20 UNF-2A
- 50 Degree C Ambient
- Triple Bearing Protection
- 1081 Design
- Continuous Duty
- Class B Insulated
- Sealed Ball Bearings
- Thermally Protected
- Service Factor: 1.3
- RPM: 3450
- Length without Shaft: 12.02
- 8.7-7.8/15.6A 208-230/115V
Details
The U.S. Motors Emerson ASB796 C-Face 1-1/2 HP Full Rated 56J 115V/230V Pool and Spa Pump Motor is a powerfully designed replacement motor.
Similar to spa and pool replacement motors, the Emerson 56 C-Flange Motor is a two-compartment model with a voltage selection device, running at 1.5HP and 115V/230V. It is Class B-insulated for efficient operation and has been designed with both sealed ball bearing sand triple bearing protection. The Emerson replacement motor has an open drip proof design for water damage prevention and is thermally protected.
Please Note: When replacing the motor on the pump, replacing the mechanical pump seal is required to ensure proper installation. Pump seal size varies depending on the pump and not the motor.
Similar to spa and pool replacement motors, the Emerson 56 C-Flange Motor is a two-compartment model with a voltage selection device, running at 1.5HP and 115V/230V. It is Class B-insulated for efficient operation and has been designed with both sealed ball bearing sand triple bearing protection. The Emerson replacement motor has an open drip proof design for water damage prevention and is thermally protected.
Please Note: When replacing the motor on the pump, replacing the mechanical pump seal is required to ensure proper installation. Pump seal size varies depending on the pump and not the motor.
Highlights
Featuring basic Single Phase wiring, the Emerson 56 C-Flange Motor delivers efficient operation. Little maintenance is required and the Emerson 56 C-Flange Motor is built to last
The Emerson 56 C-Flange Motor features a J-Frame that's ideal for jet pump service and is completely versatile with its threaded shaft and 56 C-Flange face
The Emerson 56 C-Flange Motor operates at a higher efficiency level than standard motors. It has longer insulation and bearing lives, with lower heat output and vibration. With aggressive performance and lower failure rates, energy expenditures are greatly diminished, saving heavily on operating costs
Specs
| Flange Type: | J Flange |
|---|---|
| Speed Settings: | Single Speed |
| Energy Efficiency: | High Energy Efficiency |
| Service Factor: | 1.25 - 1.50 |
| Voltage: | 115V / 208 - 230V |
| Voltage: | 120V / 240V |
| Pool Type: | In Ground |
| Horsepower: | 1-1/2 HP |
| Rating Type: | Full-Rated |
| Product Type: | Pool Motor |
| Motor Frame: | 56 Frame |
| Manufacturer: | U.S. Motors Emerson |
Warranty
See Owner's Manual for details